高电阻值小功率耐压检测仪（耐电孤耐压检测仪）-（计算的机控住）

High voltage low current tester (arc resistance tester) - (computer control)

產产品命名称：耐电弧试验机

Product name: electric arc resistance tester

物品尺寸：NDH-A

Product model: NDH - A

需要满足标准化：GB/T 1411-2002《液体隔热用料耐高低平交流电电弧焊接蓄电池放电的试验报告》（同等IEC  61621-1997）及ASTM D495等标准规范的的要求来设计制作业的，并具备IEC 149、UL 746A等检验措施

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

包括适宜范畴及模块：

本经过多次实验发现机是假设按照软件应用做调速电机、电产品和家居电产品等职业的电工作业用塑料件件、树酯胶和隔热漆等隔热的食材的耐电孤放电安全性认定，主用做胶体隔热的食材如：塑料件件、pet薄膜、树酯、黑云母、陶瓷制品、玻璃钢、隔热油、隔热漆、纸壳等物质的耐电孤放电安全性测试图片；

本耐压试验仪由统计机掌控启动，需要界面显示现今科学实验室报告设计的状态及科学实验室报告设计耗时，科学实验室报告设计尾声后并导出现今科学实验室报告设计数据文件，并可word打印.标准规范实验英文报告格式。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该机为上下两边集成结构类型，中下部为工作设计，顶部为检验箱。

2 本成品选用*新智能化调整工艺，在挑选编译程序（IEC或ASTM）可自功做测试，并在笔记本电脑手机上屏幕上显示做实验的时候历程和后果。

3 **机械性能优秀，抗骚扰专业能力强，测试图片高精度提高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 脉冲通断时间间隔数据误差：大于 ±10ms

2 调压器储电量：2kVA

3 载荷系数试验装置输出功率：12.5kV

4 耐压相电压要求：±3%

5 电流值有效控制可靠性强，精密度：±10%  电流大小精确测量导致精度：1.5%

6 参比电极对试件水压：（0.5±0.05）N

7 电极片建筑材料：钨棒

8 探针距里：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 操作情况湿度：（23±2）℃

10 操作环境内部含水率：（50±5）%

11 供电：220V±5%  50Hz  10A

12 校正    的办法：   国家标准下载/美标/10 mA 重复/20 mA 持续/30 mA反复/40 mA累计

13 试验检测编译程序内容如下：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 成品型號：

NDH-A    耐焊弧疲劳试验仪-微机管理

NDH-B    耐脉冲测试仪-手触屏的控制

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！